Please follow below mentioned steps.

1. Switch ON the Device by pressing Power Button (Power LED will glow in Red Color) 
2. Wait for few seconds for GSM LED blinking (Green color). Max it will take 3 min. 
3. Wait for few minutes for GPS LED blinking (Green color). Max 5 min if it already used in that location or Max 15 minutes for first time use. Device must be kept in open sky condition to get the GPS Signal. 
4. Once all the above conditions fulfilled, device is ready for usage.

Device can’t be Switch off using the Power button. It can only be switched off using SMS from the registered mobile no to the Primary SIM i.e. SIM One.

Description is as below

POWER LED  --- Device Charging: GREEN and Device Fully Charged: BLUE

GSM LED ---	GSM Active: GREEN

GPS ---	GPS Active: GREEN

After login with company login Please follow the below Steps to create Route.

1.	Click on Settings  Route Management  Add Route Fill the Route Name, Select Route Type, Source and Destinations latitude and longitude  Via Points  Provide maximum One or Two via Points inside the Map Route will be created.
2.	When Route will be created user will get notified that Route has been created click on notification to verify the Route If Approved the Route will be added in the route list for Trip creation  If Not Approved the created route will be deleted.

After login with company login Please follow the below Steps to create Trip.

1.	Click on Settings  Trip Management  Add Trip Fill the Diver Name, Handler Name, Select Route Name, Start and End Time, Notified User, Vehicle Type, Unloading Points  Save  Device assignment Should be done from Mobile App.